Zhengzhou Tianci Heavy Industry Machinery Co., Ltd.
Established in 2000, Zhengzhou Tianci Heavy Industry Machinery Co., Ltd. has become a leading brand in China’s fertilizer machinery industry.
Add to Cart
Npk Powder Pellet Chemical Fertilizer Granulator Double Roller Press Machine
The roller press granulator is a new type of equipment developed and produced by TIANCI company based on years of production experience. It can be widely used in fertilizer processing industry, feed production units, and chemical industry, mainly for granulating powder materials.
Its characteristics are as follows:
1. This machine adopts a non drying process for production, granulation at room temperature, and one-time molding. It has the characteristics of low investment, fast effectiveness, and good economic benefits.
2. The structure of this machine adopts granulation, molding, and screening as a whole, making it have the characteristics of beautiful appearance, simple operation, low energy consumption, and long service life.
3. The machine has a wide adaptability to raw materials, and can not only be used for granulation in fertilizer, feed, and chemical industries, but also has good applicability, especially in rare earth, metallurgy, coal, biological agents, and environmental protection engineering.
| Model | DZJ-Ⅰ1.0 | DZJ-Ⅰ2.0 | DZJ-Ⅰ3.0 | DZJ-Ⅰ4.0 | DZJ-Ⅱ1.0 | DZJ-Ⅱ2.0 |
Production Capacity(t/h) |
1~1.5 | 1.5~2.5 | 2~3 | 3~4 | 1~2 | 1.5~2.5 |
| Power (kw) | 15kw | 18.5kw | 22kw | 30kw | 15kw | 18.5kw |
| Roller size | Φ150x220 | Φ150x300 | Φ186x300 | Φ300x300 | Φ150x220 | Φ150x300 |
| Feeding size | ≦0.5mm | ≦0.5mm | ≦0.5mm | ≦0.5mm | ≦0.5mm | ≦0.5mm |
| Finished granules size | Φ2.5~Φ10 | Φ2.5~Φ10 | Φ2.5~Φ10 | Φ2.5~Φ20 | Φ2.5~Φ20 | Φ2.5~Φ20 |
| Material moisture | 2％~5％ | 2％~5％ | 2％~5％ | 2％~5％ | 2％~5％ | 2％~5％ |
The working principle of this series of roller squeezing granulators is that the belt pulley is driven by an electric motor, and the transmission belt is transmitted to a pair of high-pressure roller bodies with sliding shell through a reducer for relative work. The two rollers of the DZJ-I extruder interact with each other through a set of opposing gears, while the two rollers of the DZJ-II extruder are directly driven by two output shafts on a dedicated reducer to achieve the purpose of extrusion molding. During production, the raw materials are fed into the hopper, and are relatively extruded by the high-pressure roller body. After demolding, they flow to the crushing and forming workshop at the bottom of the roller body. The power of crushing and forming is transmitted by the sprocket of the active pressing roller shaft through a chain to a pair of crushing rollers for relative motion. After crushing and screening in the working room, the finished particles flow out of the machine through the screening mesh to the discharge chute.
